smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.5.2-pmagic64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: S2U5J9BCC02221 LU WWN Device Id: 5 0004cf 20927fc41 Firmware Version: 2AR10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jul 26 21:19:56 2016 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (12840) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 214) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 29011 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 089 077 025 Pre-fail Always - 3457 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2277 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8692 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 308 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2307 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 258 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 053 037 000 Old_age Always - 47 (Min/Max 17/64) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 098 000 Old_age Always - 21 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 28915 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 308 225 Load_Cycle_Count 0x0032 076 076 000 Old_age Always - 246575 SMART Error Log Version: 1 ATA Error Count: 1354 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1354 occurred at disk power-on lifetime: 8691 hours (362 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 9a 00 00 e0 Error: UNC 8 sectors at LBA = 0x0000009a = 154 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 9a 00 00 e0 08 00:00:40.082 READ DMA c8 00 08 03 b0 c2 e1 08 00:00:40.082 READ DMA c8 00 90 b7 11 2d e0 08 00:00:40.082 READ DMA c8 00 38 77 11 2d e0 08 00:00:40.082 READ DMA c8 00 18 57 11 2d e0 08 00:00:40.082 READ DMA Error 1353 occurred at disk power-on lifetime: 8691 hours (362 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 9a 00 00 e0 Error: UNC 8 sectors at LBA = 0x0000009a = 154 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 9a 00 00 e0 08 00:00:40.078 READ DMA c8 00 08 f3 af c2 e1 08 00:00:40.078 READ DMA c8 00 08 16 d2 1d e0 08 00:00:40.078 READ DMA c8 00 08 5a 00 00 e0 08 00:00:40.078 READ DMA c8 00 08 eb af c2 e1 08 00:00:40.078 READ DMA Error 1352 occurred at disk power-on lifetime: 8691 hours (362 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 98 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000098 = 152 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 98 00 00 e0 08 00:00:40.072 READ DMA c8 00 08 90 00 00 e0 08 00:00:40.072 READ DMA c8 00 08 88 00 00 e0 08 00:00:40.072 READ DMA c8 00 08 80 00 00 e0 08 00:00:40.071 READ DMA 27 00 00 00 00 00 e0 08 00:00:40.071 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1351 occurred at disk power-on lifetime: 8691 hours (362 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 78 98 00 00 e0 Error: UNC 120 sectors at LBA = 0x00000098 = 152 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 90 80 00 00 e0 08 00:00:40.069 READ DMA c8 00 38 40 00 00 e0 08 00:00:40.069 READ DMA c8 00 08 10 00 00 e0 08 00:00:40.069 READ DMA c8 00 18 20 00 00 e0 08 00:00:40.069 READ DMA c8 00 08 78 00 00 e0 08 00:00:40.069 READ DMA Error 1350 occurred at disk power-on lifetime: 8691 hours (362 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 9a 00 00 e0 Error: UNC 8 sectors at LBA = 0x0000009a = 154 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 9a 00 00 e0 08 00:00:40.059 READ DMA 25 00 90 80 9a a4 e0 08 00:00:40.059 READ DMA EXT 25 00 38 40 9a a4 e0 08 00:00:40.059 READ DMA EXT 25 00 18 20 9a a4 e0 08 00:00:40.059 READ DMA EXT 25 00 08 10 9a a4 e0 08 00:00:40.059 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 8692 152 # 2 Short offline Completed: read failure 90% 8691 152 # 3 Short offline Completed: read failure 90% 8691 152 # 4 Short offline Completed: read failure 90% 8690 152 # 5 Extended offline Completed: read failure 90% 8577 1120 # 6 Extended offline Completed: read failure 90% 8574 1120 # 7 Short offline Completed: read failure 90% 8574 1120 SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_read_failure [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.